ROCK WOOL

We at Moxie Supply source Rock Wool from the best manufacturer and supply to both Domestic and International Market

Product Range

LRB Mattress

The suitable application is wrapping large curve surface or cutting to fit over irregular surfaces like Boilers, Equipment, E.S.P, Ducts, Ovens, Furnaces, Tanks, Pipe Lines, Chimney walls etc

Product Specification : IS 8183:1993, ASTM C 592

  • Size of mattress: 1640mm x 1220mm
  • Thickness: 25mm to 100mm
  • Density: 85 to 160 kg./Cu.M.
  • Facing: G.I. Or S.S. Hexagonal wire
  • Standard Packing: HDPE covers

Resin Bonded Rock Wool Slabs (RB)

Resin Bonded Rock Wool Slabs

These Slabs are designed for thermal and acoustical insulation of flat or slightly curved surfaces. They are efficiently used in Under Deck Insulation, Air Conditioning Duct Insulation, Sound Proofing of Auditorium, Conference halls, Stadium, Airports, Furnaces, Ovens, Cable Ducts, Tanks, Autoclaves and Chimneys, DG sets, Solar panels etc

Product Specification : IS 8183:1993, ASTM C 612

  • Size of mattress: 1000mm x 500mm
  • Thickness: 25mm to 100mm
  • Density: 48 to 160 Kg./Cu.M
  • Facing: Without Facing / Aluminum Foil / Kraft Paper / Black Veil
  • Standard Packing: HDPE covers

Pipe Insulation

Pre Formed Rock Wool Sectional Pipe Insulation

Pre-formed Rock wool sectional pipe insulations are highly applicable for industrial Steam and Process Pipe Lines in Oil Refineries, Chemical Plants, Petrochemical Plants, and Power Plants etc. It also has the versatility to be used in heating and ventilating or other nonindustrial applications.

Product Specification : IS 9842:19994, ASTM C 547

  • Length of the pipe: 1000mm or 1m
  • Nominal Bore s: 21.3 mm to 406.4 mm (1/2” to 24”)
  • Thickness: 25mm to 100mm
  • Density: 144 TO 250 KG/M^3
  • Facing: With & Without Aluminum foil (FSK)
  • Standard Packing: 5 Ply Corrugated Boxes

Building Roll

BUILDING ROOLS

BUILDING ROLL is based on the exclusive requirements of insulation of Pre-Engineered Buildings, Large Sheds, and Pre-fabricated houses

  • Length: 5 M & 10 M
  • Width: 1.2 M
  • Thickness: 50,75 &100 mm
  • Density: 48 to 64 kg/m^3
  • Facing: Aluminium Foil (FSK)
  • Standard Packing: HDPE Covers

Super Fine Loose Rock Wool Mineral Wool

Loose Mineral Wool having exceptionally long fibers and superior technical properties are recommended for thermal and acoustical insulation application to meet severe service condition. The properties of our Loose Mineral Wool include incombustibility, water replant, odorless, non-corrosive, non-settling, fire resistant, heat resistant and sound absorption. It is highly suitable especially where preformed insulation is difficult to apply.

Loose Mineral Wool can be used for the insulating cavity of irregular dimension in equipment, tank, pipeline, oven, furnace, car exhaust, chimney walls etc. and buildings.

Product Specification: As per IS 3677

  • Standard Packing: Loose Mineral Wool packed in HDPE bags of 40 kg each.

Fire Proof Boards

rockwool-fire-proof-boards

Fire Proof products stand still on direct exposure to flames and withstand temperature maximum up to 1000°C.

Our Fire Proof products have unmatched fire retardancy properties using of which not only saves you but your valuable assets from fire accidents.

Acc. to ASTM E 84

CLASS A

Flame Spread Index 0

Smoke Developed Index 0

Acc. to BS 476 – Part 4,5,6 &7

CLASS O

Incombustible, Flame Retardant & Transfers less heat

ACOUSTIC SOLUTION BOARDS (AIB)

ACOUSTIC SOLUTION BOARDS

AIB range of rock wool products has a unique grain structure constituting porosity with mass which restricts the sound transmission in extraordinarily higher rate

A high-class sound insulation with desired STC (Sound Transmission Class) can be achieved with the high sound absorbing power and noise reduction coefficient (0.9) of our Acoustic Insulation Boards (AIB)